The AirPods Max are protected from damage and scratches by this case, which is made of very durable polycarbonate.
Due to the special coating process, even after continuous usage, its color won't deteriorate. Moreover, it may be used without leaving any oily residue, such as finger prints on the surface.
The Max's detachable cases are simple to be installed and removeed, making it easy to open and close the airpods case naturally.

• Material: PC (polycarbonate)
• Made in Korea
• It can be used safely because it is made with dyes that have acquired a REACH certification, proving no chemical harm to human health.
  *** REACH Certification: This official certification verifies that substances meet EU requirements for risk and degree of danger. It certifies that a product is not chemically hazardous in Europe or anywhere else in the world.

Notice

• Depending on the monitor and resolution settings, there may be a color difference in the case.
• Due to the properties of 3D curved printing, curves may have a design distortion.
• While printing, ink may smear on the inside of the case.
• Fine dust or tiny speck from the injection coating may occur as a result of the manufacturing process.
• While printing, the case film expands, resulting in an error margin and an off-center print.
• For an all-in-one item, the printed side on the main body and lid may be slightly out of alignment by 1 or 2 mm.
• You can easily remove the case cover if you open the lid first and then push your AirPods out of the case.

Guidance Notes before Order

• Please note that designs containing a single image may be trimmed due to printing restrictions.
• You should completely fill in the background area within the black dotted lines to take margin into account.
• Due to the nature of the process, curved areas may experience image distortion and overlapping. Therefore, important images shoyld be placed within a green dotted lines.
• If there is a high contrast between the background color and the image color, overlapping of the image may be occur and noticeable during printing. Please avoid such cases (Example: black font or design on a white background)
• Due to the process of attaching the film, the printing on curved surfaces may result in image distortion and cause lighter colors compared to flat areas.
• The product consists of four pieces: the front, back of the lid, and the front and back of the body. The assembled edges may appear lighter or white.

How to Use

• After attaching double-sided tape to the interior of the lid, kindly use it. (including double-sided tape)