MARPPLE PVC Photocard Holder

Product Info

This is a PVC photo card holder that can be made in full color.
With its exceptional print quality, you can create your own unique photo card holder.
Its spacious size allows you to store everything from idol photo cards to Polaroid photos.

Material : PVC
Size : Main Body 2.8 x 4.6 inch
Made in Korea

Product Caution

The item is produced using digital full-color printing.
It is individually packaged in OPP bags before shipping.
The actual colors may differ from those shown in the model cuts due to the environment where the photos were taken.
There may be slight variations in color and placement even for identical designs, depending on the material.
For cleaning, gently wipe with a tissue or cloth dampened with water that does not contain alcohol.
For severe stains, quickly wipe with a dry cloth or tissue to avoid color transfer.
If the item gets wet, press with a dry cloth to remove moisture and then air dry in the shade.
Avoid contact with sharp objects such as pens or knives, as they may damage the surface.
Since the fabric is melted with high heat, the end part may not be smooth and uneven. Please understand that exchange or refund is not possible.

Precautions for Purchase

A purchase order made by a minor may be cancelled by the same minor or his/her guardian if his/her guardian has not consented to such purchase.

Size chart

Size (inch)	PVC Photocard Holder
Width	2.8
Height	4.6

Production guide

EN_PVC3종 주의 가이드 복사.png

PVC products are made by pressing transparent material at high temperatures using radio frequency.
Please note that the exterior and inside of the window may show pressure lines from the mold during production.
Small spots or slight blemishes may appear on the PVC material.
Since the printing is done on the reverse side of the transparent material, these spots or blemishes may be more visible when using lighter colors.
During the pressing process, the printed area on the exterior and inside of the window may crack due to the high heat.
The material may deform during the bonding process, causing slight cracking in the printed surface.
This effect is more noticeable with darker designs and less visible with lighter colors.
Please understanding that exchanges and refunds cannot be processed for these reasons.